NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: EABPRJB2804277 Registration Date: 12/1/2011
PROJECT
- Project Name:
- PRO-TECH DESIGN & MANUFACTURING, INC.
- Project Number:
- EABPRJB2804277
- Facility Name:
- PRO-TECH DESIGN & MANUFACTURING, INC.
- Location Address:
- 4041 EXPRESS ST.
- Arlington, TX 76001
- Location County:
- Tarrant
- Start Date:
- 12/1/2011
- Completion Date:
- 3/31/2013
- Estimated Cost:
- $270,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Install Class 10,000 prebuilt "clean room" and connecting plumbing, electrical hvac. Add electrical capacity, a
- Square Footage:
- Unknown
- Are the private funds provided by the tenant?
- Not available
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Registered by TDLR
RAS
Not Assigned
OWNER
- Owner Name:
- PRO-TECH DESIGN & MANUFACTURING INC.
- Owner Address:
- C, THOMAS ("TOM") CORBIN 14561 MARQUARODT AVE.
- SANTA FE SPRINGS, CA 90670
- Owner Phone:
- (562) 207-1683
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- NOAKES ENGINEERING CO. INC.
- Design Firm Address:
- JESSICA KILGORE 3603-A W. PIONEER PARKWAY
- ARLINGTON, TX 76013
- Design Firm Phone:
- (817) 261-7900
