NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: EABPRJB2807890 Registration Date: 2/14/2012
PROJECT
- Project Name:
- GM ARLINGTON STAMPING FACILITY
- Project Number:
- EABPRJB2807890
- Facility Name:
- GENERAL MOTORS ARLINGTON PLANT
- Location Address:
- 2525 ABRAMS ROAD
- Arlington, TX 76010
- Location County:
- Tarrant
- Start Date:
- 3/1/2012
- Completion Date:
- 5/1/2013
- Estimated Cost:
- $64,000,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- CONSTRUCTION OF A 302,150 SF ADDITION TO THE EXISTING GMARLINGTON PLNT FOR NEW STAMPING OPS RV1175
- Square Footage:
- Unknown
- Are the private funds provided by the tenant?
- Not available
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Registered by TDLR
RAS
Not Assigned
OWNER
- Owner Name:
- GENERAL MOTORS
- Owner Address:
- DIRK TAYLOR 2525 E ABRAM STREET
- ARLINGTON, TX 76010
- Owner Phone:
- (817) 819-6731
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- GHAFARI ASSOCIATES LLC
- Design Firm Address:
- MICHAEL A. NEVILLE 17101 MICHIGAN AVE
- DEARBORN, MI 48126
- Design Firm Phone:
- (313) 436-8658
