NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: EABPRJB2816382 Registration Date: 7/13/2012
PROJECT
- Project Name:
- NEW BUILDING, GRINDING AND RECIEVING ADD
- Project Number:
- EABPRJB2816382
- Facility Name:
- PALMER FEED & SUPPLY INC
- Location Address:
- 316 MLK BLVD
- San Angelo, TX 76903
- Location County:
- Tom Green
- Start Date:
- 7/1/2012
- Completion Date:
- 2/1/2013
- Estimated Cost:
- $2,166,689
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Build and install new receiving, grinding and batching system, complete with concrete, electrical, mechanical su
- Square Footage:
- Unknown
- Are the private funds provided by the tenant?
- Not available
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Registered by TDLR
RAS
Not Assigned
OWNER
- Owner Name:
- PALMER PALMER & PALMER
- Owner Address:
- WINN PALMER 316 MLK BLVD
- SAN ANGELO, TX 76903
- Owner Phone:
- (325) 227-2928
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- MCMAHON ENGINEERS
- Design Firm Address:
- PAUL BENEDICT 1445 MCMAHON DRIVE
- NEENAH, WI 54956
- Design Firm Phone:
- (920) 751-4200
