NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: EABPRJB8815870 Registration Date: 4/27/2018
PROJECT
- Project Name:
- KOLSTER WELDING
- Project Number:
- EABPRJB8815870
- Facility Name:
- KOLSTER WELDING
- Location Address:
- 428 MONTAGUE
- San Angelo, TX 76905
- Location County:
- Tom Green
- Start Date:
- 5/1/2018
- Completion Date:
- 12/1/2018
- Estimated Cost:
- $150,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- 40X100X18 PEMB OFFICE/SHOP 30X40X18 WAREHOUSE
- Square Footage:
- 1,500 ft 2
- Are the private funds provided by the tenant?
- Not available
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Susan Gregonis
RAS
- RAS Name:
- GREGONIS, SUSAN
- RAS #:
- 1077
- RAS Address:
- 5336 FAIRWAY DR
- SAN ANGELO, TX 76904
- RAS Phone:
- (325) 450-2805
OWNER
- Owner Name:
- NICK & TINA KOLSTER
- Owner Address:
- NICK KOLSTER 10377 RUNION RD
- SAN ANGELO, TX 76905
- Owner Phone:
- (325) 895-1949
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- SKG ENGINEERING LLC
- Design Firm Address:
- JERRY WHITE 706 SOUTH ABE
- SAN ANGELO, TX 76903
- Design Firm Phone:
- (325) 655-1288
