NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: EABPRJB8820999 Registration Date: 7/6/2018
PROJECT
- Project Name:
- RENOVATE TO CREATE TRAINING CENTER
- Project Number:
- EABPRJB8820999
- Facility Name:
- POLYGUARD PRODUCTS
- Location Address:
- 3801 S. IH-45
- Ennis, TX 75119
- Location County:
- Ellis
- Start Date:
- 8/1/2018
- Completion Date:
- 11/1/2018
- Estimated Cost:
- $280,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Enclose a portion of an existing warehouse to create a 3,600 square foot Training Space. Construct a 1,600 squar
- Square Footage:
- Unknown
- Are the private funds provided by the tenant?
- Not available
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Registered by TDLR
RAS
- RAS Name:
- TIRADO, WALLY
- RAS #:
- 251
- RAS Address:
- 7801 ALMA DR STE 105-104
- PLANO, TX 75025
- RAS Phone:
- (214) 215-7485
OWNER
- Owner Name:
- POLYGUARD PRODUCTS
- Owner Address:
- CHRIS VALEK 4101 S. IH-45
- ENNIS, TX 75119
- Owner Phone:
- (972) 351-2579
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- SEELY-WATKINS & ASSOCIATES
- Design Firm Address:
- LORAN SEELY P.O. BOX 759
- CORSICANA, TX 75151
- Design Firm Phone:
- (903) 875-4290
