NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2019001428 Registration Date: 12/20/2018
PROJECT
- Project Name:
- Western Extrusions Finished Goods
- Project Number:
- TABS2019001428
- Facility Name:
- Western Extrusions
- Location Address:
- 1725 Sandy Lake Rd, Carrollton, TX 75006
- Carrollton, TX 75006
- Location County:
- Dallas
- Start Date:
- 1/21/2019
- Completion Date:
- 8/1/2019
- Estimated Cost:
- $600,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Build a 34,000 s.f. pre-engineered metal building including storage space, covered truck loading area and typical office finished out.
- Square Footage:
- 34,816 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Craig Jacobson
RAS
- RAS Name:
- FRED DEAN,SHINAULT
- RAS #:
- 309
- RAS Address:
- 5435 N GARLAND AVE STE 140-121
- GARLAND, TX 75040
- RAS Phone:
- (214) 497-0926
OWNER
- Owner Name:
- Western Extrusions
- Owner Address:
- 1725 Sandy Lake Rd,
- Carrollton, Texas 75006
- Owner Phone:
- (972) 245-7515
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- RGA Architects
- Design Firm Address:
- 304 Lamar st
- Roanoke, Select 76262
- Design Firm Phone:
- (817) 430-3382
