NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2019002447 Registration Date: 1/11/2019
PROJECT
- Project Name:
- Frito Lay Irving - BCP Capacity
- Project Number:
- TABS2019002447
- Facility Name:
- Frito Lay Irving
- Location Address:
- 701 N. Wildwood Dr.
- Irving, TX 75061
- Location County:
- Dallas
- Start Date:
- 2/1/2019
- Completion Date:
- 2/29/2020
- Estimated Cost:
- $17,300,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Building addition (tilt up concrete and steel)for manufacturing expansion to existing facility. Site work to provide rerouted fire lane, additional parking and new electrical service (Oncor). New fire alarm and fire sprinkler addition to existing fir
- Square Footage:
- 120,000 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Jeff Gutknecht
RAS
- RAS Name:
- JEFFREY A,GUTKNECHT
- RAS #:
- 472
- RAS Address:
- 624 W UNIVERSITY DR STE 214
- DENTON, TX 76201
- RAS Phone:
- (214) 808-9248
OWNER
- Owner Name:
- Anna Ferrero
- Owner Address:
- 7701 Legacy Dr
- Plano, Texas 75024
- Owner Phone:
- (972) 334-5319
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Haskell Texas Engineering
- Design Firm Address:
- 2591 Dallas Pkwy #405
- Frisco, Texas 75034
- Design Firm Phone:
- 972-731-6366
