NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2019002924 Registration Date: 1/18/2019
PROJECT
- Project Name:
- Medivators Extruder Room
- Project Number:
- TABS2019002924
- Facility Name:
- Medivators
- Location Address:
- 3150 Pollok Drive
- Conroe, TX 77303
- Location County:
- Montgomery
- Start Date:
- 1/25/2019
- Completion Date:
- 2/28/2019
- Estimated Cost:
- $100,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Interior remodel to create a new room for extruder equipment.
- Square Footage:
- 1,300 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Sammy Reese
RAS
- RAS Name:
- CESAR A,DIAZ
- RAS #:
- 1357
- RAS Address:
- 7751 PORTAL DR
- HOUSTON, TX 77071
- RAS Phone:
- (713) 894-2237
OWNER
- Owner Name:
- Medivators INC
- Owner Address:
- 3150 Pollok Drive
- Conroe, Texas 77303
- Owner Phone:
- (963) 520-2821
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- REESE DS, INC.
- Design Firm Address:
- 6420 Richmond Ave Suite 345
- Houston, Select 77057
- Design Firm Phone:
- (713) 572-5200
