NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2019005611 Registration Date: 2/25/2019
PROJECT
- Project Name:
- Caliber Collision
- Project Number:
- TABS2019005611
- Facility Name:
- Caliber Collision
- Location Address:
- IH 10 E N.Foster Rd. & IH 10 E.
- Converse, TX 78109
- Location County:
- Bexar
- Start Date:
- 6/1/2019
- Completion Date:
- 2/1/2020
- Estimated Cost:
- $1,500,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- An Auto body repair shop under 2-B construction is proposed. It will be divided into two areas which is the workshop area and office/lobby. The workshop will consist of Mtl. Panel and the office will have masonry and tuff wall for exterior.
- Square Footage:
- 18,559 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Kenny Cortes
RAS
- RAS Name:
- JEFFREY A,GUTKNECHT
- RAS #:
- 472
- RAS Address:
- 624 W UNIVERSITY DR STE 214
- DENTON, TX 76201
- RAS Phone:
- (214) 808-9248
OWNER
- Owner Name:
- Cross Development
- Owner Address:
- 4336 Marsh Ridge
- Carrollton, Texas 75010
- Owner Phone:
- (214) 614-8252
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- NCA PARTNERS
- Design Firm Address:
- 5646 Milton St. Suite 610
- Dallas, Texas 75206
- Design Firm Phone:
- (214) 361-9901
