NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2019006692 Registration Date: 3/11/2019
PROJECT
- Project Name:
- Ingram Micro, Fort Worth, MHE
- Project Number:
- TABS2019006692
- Facility Name:
- Ingram Micro, Inc. - Distribution Facility
- Location Address:
- 14500 FAA Blvd
- Fort Worth, TX 76155
- Location County:
- Tarrant
- Start Date:
- 4/1/2019
- Completion Date:
- 11/1/2019
- Estimated Cost:
- $9,500,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- This project does not add area to the building and does not modify the use of the space. The scope of this project adds a mezzanine and material handling equipment to assist in the existing use of the space (product storage and distribution).
- Square Footage:
- 270,400 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Steve Hanscom
RAS
Not Assigned
OWNER
- Owner Name:
- CBRE; Mary Lempke
- Owner Address:
- 2100 McKinney Avenue, Suite 700
- Dallas, Texas 75201
- Owner Phone:
- (214) 979-6129
- Contact Name:
TENANT
- Tenant Name:
- Ingram Micro, Inc; Ron Wacker
- Tenant Phone:
- 817-532-3497
DESIGN FIRM
- Design Firm Name:
- Bastian Solutions, Inc
- Design Firm Address:
- 10585 N. Meridian St.
- Indianapolis, Indiana 46290
- Design Firm Phone:
- 317-575-9992
