NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2019009646 Registration Date: 4/18/2019
PROJECT
- Project Name:
- Staley Steel Addition
- Project Number:
- TABS2019009646
- Facility Name:
- Staley Steel
- Location Address:
- 9620 St. Johns Rd.
- Pilot Point, TX 76258
- Location County:
- Denton
- Start Date:
- 3/15/2019
- Completion Date:
- 12/15/2019
- Estimated Cost:
- $2,000,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Build an addition to our existing manufacturing facility. At a later date building a Breakroom
- Square Footage:
- 32,186 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Gary Jacobs
RAS
- RAS Name:
- GARY J,JACOBS
- RAS #:
- 224
- RAS Address:
- 701 CANYON DR STE 110
- COPPELL, TX 75019
- RAS Phone:
- (972) 331-5699
OWNER
- Owner Name:
- Staley Steel
- Owner Address:
- 9620 St. Johns Rd
- Pilot Point, Texas 76258
- Owner Phone:
- (940) 686-6000
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Ambrose Engineering
- Design Firm Address:
- W66N215 Commerce Court
- Cedarburg, Wisconsin 53012
- Design Firm Phone:
- (262) 377-7602
