NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2019011555 Registration Date: 5/14/2019
PROJECT
- Project Name:
- Formosa Plastics
- Project Number:
- TABS2019011555
- Facility Name:
- Office Facility
- Location Address:
- 201-301 Formosa Dr.
- Point Comfort, TX 77978
- Location County:
- Calhoun
- Start Date:
- 7/1/2019
- Completion Date:
- 9/15/2019
- Estimated Cost:
- $700,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Single story office building. Industrialized construction of (6) 40'x12' containers (factory built).
- Square Footage:
- 2,880 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Bradley Doeden
RAS
Not Assigned
OWNER
- Owner Name:
- FORMOSA PLASTICS CORP TEXAS
- Owner Address:
- %PROPERTY MANAGEMENT DEPT PO BOX 700
- Point Comfort, Texas 77978
- Owner Phone:
- (361) 987-7718
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- GLMV Architecture
- Design Firm Address:
- 1525 E. Douglas
- Wichita, Kansas 67211
- Design Firm Phone:
- (316) 265-9367
