NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2019011821 Registration Date: 5/16/2019
PROJECT
- Project Name:
- Alcon Filler A Room Modifications
- Project Number:
- TABS2019011821
- Facility Name:
- ASPEX Manufacturing
- Location Address:
- 6500 Will Rogers Blvd.
- Fort Worth, TX 76134
- Location County:
- Tarrant
- Start Date:
- 7/1/2019
- Completion Date:
- 12/31/2019
- Estimated Cost:
- $600,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Approximately 500 sf of interior renovations to existing clean room to accommodate replacement of existing manufacturing equipment.
- Square Footage:
- 500 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Registered by TDLR
RAS
- RAS Name:
- DAVID G,CHRISTENSEN
- RAS #:
- 1083
- RAS Address:
- PO BOX 1757
- ROANOKE, TX 76262
- RAS Phone:
- (940) 626-0696
OWNER
- Owner Name:
- Alcon Laboratories
- Owner Address:
- 6201 South Freeway
- Fort Worth, Texas 76134
- Owner Phone:
- (817) 568-6216
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
Not Assigned
