NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2019014243 Registration Date: 6/18/2019
PROJECT
- Project Name:
- Fly Away Valet Booths at San Antonio International Airport
- Project Number:
- TABS2019014243
- Facility Name:
- Terminal A and CONRAC
- Location Address:
- 9800 Airport Blvd.
- San Antonio, TX 78216
- Location County:
- Bexar
- Start Date:
- 7/8/2019
- Completion Date:
- 8/30/2019
- Estimated Cost:
- $130,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Installing 2 Valet booths at the San Antonio International Airport. Work included are electrical and data run from the demarcs to booths.
- Square Footage:
- 147 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Christopher Kimm
RAS
- RAS Name:
- PETER F,GROJEAN
- RAS #:
- 75
- RAS Address:
- 1218 E EUCLID AVE STE 1
- SAN ANTONIO, TX 78212
- RAS Phone:
- (210) 271-1014
OWNER
- Owner Name:
- Kurt Schwager with Jacobsen Daniels
- Owner Address:
- 337 W. Lockwood, Suite 330
- St. Louis, Montana 63119
- Owner Phone:
- (734) 961-3200
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- WestEast Design Group, LLC
- Design Firm Address:
- 200 E. Grayson St., Suite 207
- San Antonio, Texas 78215
- Design Firm Phone:
- 210-530-0755
