NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020000412 Registration Date: 9/8/2019
PROJECT
- Project Name:
- Norththrop Grumman Office Fit-out
- Project Number:
- TABS2020000412
- Facility Name:
- Project Tech Building - Port San Antonio
- Location Address:
- 3203 General Hudnell Drive
- San Antonio, TX 78226
- Location County:
- Bexar
- Start Date:
- 9/15/2019
- Completion Date:
- 3/16/2020
- Estimated Cost:
- $4,000,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Interior renovations to create office, conference and support spaces for Northrop Grumman on the first and second floors of the building
- Square Footage:
- 34,515 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- George Patterson
RAS
- RAS Name:
- GEORGE A,PATTERSON
- RAS #:
- 503
- RAS Address:
- PO BOX 8616
- FORT WORTH, TX 76124
- RAS Phone:
- (817) 451-0399
OWNER
- Owner Name:
- Port San Antonio Attn: Daniel Block, Project Manager
- Owner Address:
- 907 Billy Mitchell Blvd
- San Antonio, Texas 78226
- Owner Phone:
- (210) 376-0425
- Contact Name:
TENANT
- Tenant Name:
- Larry Bell
- Tenant Phone:
- 410-951-2349
DESIGN FIRM
- Design Firm Name:
- STV. Inc.
- Design Firm Address:
- 205 West Welsh Dr.
- Douglassville, Pennsylvania 19518
- Design Firm Phone:
- 610-385-8200
