NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020000562 Registration Date: 9/10/2019
PROJECT
- Project Name:
- POSSMEI - SHOWROOM REMODEL
- Project Number:
- TABS2020000562
- Facility Name:
- POSSMEI - USA OFFICE
- Location Address:
- 15015 E. BELTWOOD PKWY
- Addison, TX 75001
- Location County:
- Dallas
- Start Date:
- 10/15/2019
- Completion Date:
- 12/15/2019
- Estimated Cost:
- $70,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- REMODEL OF EXISTING OFFICE
- Square Footage:
- 2,600 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Brandon Quimbey
RAS
Not Assigned
OWNER
- Owner Name:
- POSSMEI PROPERTIES HOLDING LLC
- Owner Address:
- 23476 KIDDER ST
- HAYWOOD, California 94545
- Owner Phone:
- (510) 324-8888
- Contact Name:
TENANT
- Tenant Name:
- POSSMEI TEXAS INC
- Tenant Phone:
- (972) 685-5505
DESIGN FIRM
- Design Firm Name:
- WANG ENGINEERING, INC
- Design Firm Address:
- 1200 E. EXECUTIVE DR #STE.98
- RICHARDSON, Texas 75081
- Design Firm Phone:
- (972) 814-4761
