NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020003962 Registration Date: 10/25/2019
PROJECT
- Project Name:
- Entegris Solids RM 6102
- Project Number:
- TABS2020003962
- Facility Name:
- Entegris
- Location Address:
- 706 Houston Clinton Dr.
- Burnet, TX 78611
- Location County:
- Burnet
- Start Date:
- 7/13/2020
- Completion Date:
- 3/8/2021
- Estimated Cost:
- $380,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Converting maintenance shop into lab room.
- Square Footage:
- 1,500 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- James Bell
RAS
- RAS Name:
- JAMES W,BELL
- RAS #:
- 1280
- RAS Address:
- STE F-270 16238 RANCH ROAD 620 N
- AUSTIN, TX 78717
- RAS Phone:
- (512) 820-3967
OWNER
- Owner Name:
- Entegris
- Owner Address:
- 706 Houston Clinton Dr.
- Burnet, Texas 78611
- Owner Phone:
- (512) 756-7314
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Fuse Architecture Studio
- Design Firm Address:
- 1005 E. St. Elmo Dr. Bldg 4
- Austin, Texas 78745
- Design Firm Phone:
- (512) 992-1520
