NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020006606 Registration Date: 12/3/2019
PROJECT
- Project Name:
- HPE / HPI HOUSTON, TX - CCM3 SEPARATION
- Project Number:
- TABS2020006606
- Facility Name:
- HP Inc. CCM3
- Location Address:
- 11403 Compaq Center Drive Houston
- Houston, TX 77070
- Location County:
- Harris
- Start Date:
- 3/1/2020
- Completion Date:
- 4/1/2020
- Estimated Cost:
- $50,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- THE PROJECT IS LOCATED IN HARRIS COUNTY NEAR HOUSTON, TX. IT IS A SEPARATION OF EXISTING BUILDINGS AND PEDESTRIAN SPINES ON A TECHNOLOGY AND MANUFACTURING CAMPUS. SCOPE OF WORK IS TWO (2) SEPARATION WALLS ALONG WITH M.E.P. SEPARATION AND RE-ROUTING
- Square Footage:
- 23 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Jeff Massey
RAS
- RAS Name:
- MARCELA ABADI,RHOADS
- RAS #:
- 240
- RAS Address:
- 7516 DANFIELD CT
- DALLAS, TX 75252
- RAS Phone:
- (214) 403-8714
OWNER
- Owner Name:
- Bill Mattingly, Sr. Project Manager on behalf of Hewlett Packard Inc.
- Owner Address:
- Hewlett Packard Inc. 10400 Energy DR
- Spring, Texas 77389
- Owner Phone:
- 281-798-8392
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- REES
- Design Firm Address:
- 1025 N. Stemmons Freeway, Suite 737
- Dallas, Texas 75207
- Design Firm Phone:
- 281-380-0689
