NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020007025 Registration Date: 12/10/2019
PROJECT
- Project Name:
- Challenge Manufacturing
- Project Number:
- TABS2020007025
- Facility Name:
- Challenge Manufacturing
- Location Address:
- 5101 Stateman Dr.
- Irving, TX 75063
- Location County:
- Dallas
- Start Date:
- 1/6/2020
- Completion Date:
- 4/6/2020
- Estimated Cost:
- $250,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Renovations to business offices, relocating and adding walls.
- Square Footage:
- 5,000 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Jerry Fitzpatrick
RAS
Not Assigned
OWNER
- Owner Name:
- Iron Owner LLC
- Owner Address:
- 9 W 57TH ST 42ND FLR
- NEW YORK, New York 10019
- Owner Phone:
- (214) 438-1562
- Contact Name:
- Shannon McGlasson
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- FDCS
- Design Firm Address:
- PO Box 864784
- Plano, Texas 75086
- Design Firm Phone:
- 214-720-1945
