NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020008584 Registration Date: 1/7/2020
PROJECT
- Project Name:
- Frito Lay Irving - 3rd Rail Spur and Canopies
- Project Number:
- TABS2020008584
- Facility Name:
- Frito Lay
- Location Address:
- 701 N. Wildwood Dr.
- Irving, TX 75061
- Location County:
- Dallas
- Start Date:
- 3/1/2020
- Completion Date:
- 7/1/2020
- Estimated Cost:
- $640,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Install a new rail spur onto the Frito site for the delivery of raw material for the manufacturing facility. 2 pre-engineered metal canopies (open air)will be provided over the rail at the unload locations.
- Square Footage:
- 8,450 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Jeff Gutknecht
RAS
- RAS Name:
- JEFFREY A,GUTKNECHT
- RAS #:
- 472
- RAS Address:
- 624 W UNIVERSITY DR STE 214
- DENTON, TX 76201
- RAS Phone:
- (214) 808-9248
OWNER
- Owner Name:
- Pepsico
- Owner Address:
- Amiel Weerasinghe 7701 Legacy
- Plano, Texas 75024
- Owner Phone:
- (972) 334-7000
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Haskell Architects and Engineers
- Design Firm Address:
- 111 Riverside Ave
- Jacksonville, Florida 32202
- Design Firm Phone:
- (904) 791-4500
