NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020009799 Registration Date: 1/23/2020
PROJECT
- Project Name:
- ESAB
- Project Number:
- TABS2020009799
- Facility Name:
- ESAB Manufactoring
- Location Address:
- 2800 Airport Road
- Denton, TX 76207
- Location County:
- Denton
- Start Date:
- 2/1/2020
- Completion Date:
- 4/1/2020
- Estimated Cost:
- $55,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Addition of vestibule wall and door.
- Square Footage:
- 1,521 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Tim Westphal
RAS
- RAS Name:
- TIMOTHY D,WESTPHAL
- RAS #:
- 161
- RAS Address:
- 2616 L BAKER RD
- GOLIAD, TX 77963
- RAS Phone:
- (361) 220-1544
OWNER
- Owner Name:
- NM CLFX, LP
- Owner Address:
- 787 Seventh Ave
- New York, New York 10019
- Owner Phone:
- 212-655-0127
- Contact Name:
- Peter Kaplan
TENANT
- Tenant Name:
- ESAB (David Karle-contact person)
- Tenant Phone:
- 940-381-1365
DESIGN FIRM
Not Assigned
