NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020011497 Registration Date: 2/13/2020
PROJECT
- Project Name:
- Peterson Plaza Clock Tower Elevator Enclosure
- Project Number:
- TABS2020011497
- Facility Name:
- Peterson Plaza Clock Tower
- Location Address:
- 225 Sidney Baker St.
- Kerrville, TX 78028
- Location County:
- Kerr
- Start Date:
- 4/1/2020
- Completion Date:
- 1/15/2021
- Estimated Cost:
- $250,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project involves public funds, public land, or is a Federally funded roadway project.
- Scope of Work:
- The project consists of construction for a new elevator shaft enclosure for an existing open-air elevator that serves the Peterson Clock Tower and Skybridge, located adjacent to the existing city hall.
- Square Footage:
- 2,055 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Robert Ronson
RAS
Not Assigned
OWNER
- Owner Name:
- City of Kerrville
- Owner Address:
- 200 Sidney Baker
- Kerrville, Texas 78028
- Owner Phone:
- 830-258-1170
- Contact Name:
- Kyle Burow, P.E., CFM
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Beaty Palmer Architects
- Design Firm Address:
- 110 Broadway Suite 600
- San Antonio, Texas 78205
- Design Firm Phone:
- (210) 212-8022
