NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020013518 Registration Date: 3/11/2020
PROJECT
- Project Name:
- Project Snoopy
- Project Number:
- TABS2020013518
- Facility Name:
- Freshpet Pet Food Manufacturing Facility
- Location Address:
- 4800 Sterilite Drive
- Ennis, TX 75119
- Location County:
- Ellis
- Start Date:
- 7/1/2020
- Completion Date:
- 8/31/2020
- Estimated Cost:
- $265,000,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- The facility concept will provide for an initial build-out of approximately 320,000sqft in plan, 400,000sqft including 2nd floor admin area with three installed production lines, administrative, warehouse, receiving/finished product storage/docks, ut
- Square Footage:
- 400,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Fred dean Shinault
RAS
- RAS Name:
- FRED DEAN,SHINAULT
- RAS #:
- 309
- RAS Address:
- 5435 N GARLAND AVE STE 140-121
- GARLAND, TX 75040
- RAS Phone:
- (214) 497-0926
OWNER
- Owner Name:
- Freshpet Kitchens, Willie Everett Site Lead
- Owner Address:
- 179 North Commerce Way
- Bethlehem, Pennsylvania 18017
- Owner Phone:
- 484 528 7055
- Contact Name:
- Willie Everett
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- CRB Consulting Engineers
- Design Firm Address:
- 701 Emerson Road, Suite 500
- Saint Louis, Missouri 63141
- Design Firm Phone:
- (314) 997 1515
