NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020014110 Registration Date: 3/20/2020
PROJECT
- Project Name:
- Katy Spring & Manufacturing
- Project Number:
- TABS2020014110
- Facility Name:
- Katy Spring & Manufacturing
- Location Address:
- 3535 Schlipf
- Katy, TX 77493
- Location County:
- Waller
- Start Date:
- 4/1/2020
- Completion Date:
- 12/31/2020
- Estimated Cost:
- $450,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Office addition to existing factory building.
- Square Footage:
- 3,200 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Laura Fulkerson
RAS
- RAS Name:
- LAURA,FULKERSON
- RAS #:
- 96
- RAS Address:
- STE 280 505 N SAM HOUSTON PKWY E
- HOUSTON, TX 77060
- RAS Phone:
- (281) 999-3733
OWNER
- Owner Name:
- Katy Spring & Manufacturing
- Owner Address:
- 3535 Schlipf Road
- Houston, Texas 77493
- Owner Phone:
- (281) 391-1888
- Contact Name:
- James West
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Rivers Barden Architects
- Design Firm Address:
- 718 Richmond Ave.
- Houston, Texas 77006
- Design Firm Phone:
- (281) 845-9801
