NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020015081 Registration Date: 4/6/2020
PROJECT
- Project Name:
- Clean Room Addition Midland Manufacturing
- Project Number:
- TABS2020015081
- Facility Name:
- Clean Room Addition Midland Manufacturing
- Location Address:
- 4800 Esco
- Fort Worth, TX 76140
- Location County:
- Tarrant
- Start Date:
- 5/1/2020
- Completion Date:
- 7/31/2020
- Estimated Cost:
- $350,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Addition to manufacturing plant
- Square Footage:
- 2,606 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Edward Nelson
RAS
Not Assigned
OWNER
- Owner Name:
- Midland Manufacturing
- Owner Address:
- 4800 Esco
- Fort Worth, Texas 76140
- Owner Phone:
- 817 478-4848
- Contact Name:
- George Westhoff Jr.
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- ERN Architects, Inc.
- Design Firm Address:
- 11909 Preston Road Suite 292
- Dallas, Texas 75230
- Design Firm Phone:
- 817-504-5192
