NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020015377 Registration Date: 4/9/2020
PROJECT
- Project Name:
- BELL - Manufacturing Technology Center
- Project Number:
- TABS2020015377
- Facility Name:
- BELL - Manufacturing Technology Center
- Location Address:
- 5401 Sandshell Drive
- Fort Worth, TX 76137
- Location County:
- Tarrant
- Start Date:
- 4/1/2020
- Completion Date:
- 1/31/2021
- Estimated Cost:
- $4,500,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Main Entry Lobby with supporting Office Space and Manufacturing Area.
- Square Footage:
- 138,000 ft 2
- Are the private funds provided by the tenant?
- Yes
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Kimberly Goss
RAS
Not Assigned
OWNER
- Owner Name:
- Aplpha industrial Prpoerties
- Owner Address:
- 1500 North Halstead Street, 2nd Floor
- Chicago, Illinois 60642
- Owner Phone:
- (214) 876-4103
- Contact Name:
- Bryan OHair
TENANT
- Tenant Name:
- Mr. Richard Kurz
- Tenant Phone:
- (817) 280-1476
DESIGN FIRM
- Design Firm Name:
- HKS Inc.
- Design Firm Address:
- 350 N. St. Paul St., Suite 100
- Dallas, Texas 75201
- Design Firm Phone:
- (214) 969-5599
