NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020018162 Registration Date: 5/29/2020
PROJECT
- Project Name:
- J&J-Ethicon Facility Upgrades
- Project Number:
- TABS2020018162
- Facility Name:
- Ethicon, Inc.
- Location Address:
- 3348 Pulliam St
- San Angelo, TX 76905
- Location County:
- Tom Green
- Start Date:
- 7/1/2020
- Completion Date:
- 1/29/2021
- Estimated Cost:
- $11,000,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Sterilization facility upgrades to integrate 2 new Lesni Abators, coordinate all control systems, & re-route EO exhaust. Existing wet scrubber will be removed. Build new support building & pipe bridge for Lesni abators.
- Square Footage:
- 76,905 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- John Fragulis
RAS
Not Assigned
OWNER
- Owner Name:
- Ethicon, Inc.
- Owner Address:
- 3348 Pulliam St
- San Angelo, Texas 76905
- Owner Phone:
- (325) 482-5200
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Pond & Company
- Design Firm Address:
- 3500 Parkway Lane, Suite 500
- Peachtree Corners, Georgia 30092
- Design Firm Phone:
- 678336770
