NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020019988 Registration Date: 7/2/2020
PROJECT
- Project Name:
- An Addition to Summit Plastic Molding
- Project Number:
- TABS2020019988
- Facility Name:
- Summit Plastic Molding
- Location Address:
- 201 Darrington Road
- Horizon City, TX 79928
- Location County:
- El Paso
- Start Date:
- 8/3/2020
- Completion Date:
- 3/3/2021
- Estimated Cost:
- $1,400,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- A 22,270 sf addition to an existing 70,310 sf pre-engineered metal building for a plastic molding facility.
- Square Footage:
- 22,270 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Mariely Barrera
RAS
- RAS Name:
- ALEJANDRO,MIRELES
- RAS #:
- 1267
- RAS Address:
- 11980 GREENVEIL DR
- EL PASO, TX 79936
- RAS Phone:
- (915) 258-9274
OWNER
- Owner Name:
- Summit Plastic Molding II, Inc.
- Owner Address:
- 51340 Celeste
- Shelby Township, Michigan 48314
- Owner Phone:
- (586) 262-4428
- Contact Name:
- Ray Kalinowski
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- PSRBB Commercial Group Inc.
- Design Firm Address:
- 1810 Wyoming Avenue
- El Paso, Texas 79903
- Design Firm Phone:
- (915) 534-8082
