NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020021394 Registration Date: 7/30/2020
PROJECT
- Project Name:
- 3.222 Nexaris Angio Buildout Project
- Project Number:
- TABS2020021394
- Facility Name:
- UTSW William P Clements Jr University Hospital
- Location Address:
- 5323 Harry Hines Blvd
- Dallas, TX 75390
- Location County:
- Dallas
- Start Date:
- 10/1/2020
- Completion Date:
- 8/20/2021
- Estimated Cost:
- $714,248
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project involves public funds, public land, or is a Federally funded roadway project.
- Scope of Work:
- Build out an existing storage room to accommodate a new Siemens equipment for hospital use. The Nexaris - Zee ceiling - CT sliding Gantry equipment layout requires a modification of the existing room to accommodate this machine
- Square Footage:
- 795 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Ross Thomas
RAS
- RAS Name:
- ROSS A,THOMAS
- RAS #:
- 1241
- RAS Address:
- 1407 W UNIVERSITY DR
- MCKINNEY, TX 75069
- RAS Phone:
- (469) 964-2682
OWNER
- Owner Name:
- UT Southwestern
- Owner Address:
- 5323 Harry Hines Blvd
- Dallas, Texas 75390
- Owner Phone:
- (214) 648-2400
- Contact Name:
- Juan Guerra
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Jacobs
- Design Firm Address:
- 1999 Bryan St
- Dallas, Texas 75201
- Design Firm Phone:
- (214) 583-8567
