NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2020022165 Registration Date: 8/13/2020
PROJECT
- Project Name:
- MISSION Foods Manufacturing Facility – Production Process Lines Expansion
- Project Number:
- TABS2020022165
- Facility Name:
- Mission Foods Manufacturing Facility
- Location Address:
- 2404 West Pioneer Parkway
- Grand Prairie, TX 75051
- Location County:
- Tarrant
- Start Date:
- 8/17/2020
- Completion Date:
- 12/31/2020
- Estimated Cost:
- $3,817,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- INTERIOR RENOVATION OF A FOOD PROCESSING FACILITY TO INCREASE PRODUCTION PROCESS LINES AS FOLLOWS: 2,556 GSF ENCLOSED PACKAGING AREA IS ADDED TO END OF EXISTING FOOD SERVICE PROCESS AREA FOR EXTENSION OF PROCESS LINE PACKAGING. TWO NEW PROCESS LINES
- Square Footage:
- 23,094 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Jeffrey Zutz
RAS
Not Assigned
OWNER
- Owner Name:
- GRUMA CORPORATION
- Owner Address:
- 5601 EXECUTIVE DRIVE-SUITE 800
- IRVING, Texas 75038
- Owner Phone:
- (972) 232-5071
- Contact Name:
- FRANK VALENZUELA
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- FLAD ARCHITECTS
- Design Firm Address:
- 644 science drive
- madison, Wisconsin 53711
- Design Firm Phone:
- 608-232-1323
