NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021002285 Registration Date: 10/9/2020
PROJECT
- Project Name:
- New Building for Weighing Technologies
- Project Number:
- TABS2021002285
- Facility Name:
- Weigh Tech
- Location Address:
- 4250 Milam St
- Beaumont, TX 77707
- Location County:
- Jefferson
- Start Date:
- 1/1/2021
- Completion Date:
- 11/15/2022
- Estimated Cost:
- $900,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- New Building, offices and shop areas. New development with parking areas.
- Square Footage:
- 7,120 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Ernest Taylor
RAS
Not Assigned
OWNER
- Owner Name:
- John Rihn
- Owner Address:
- 2105 Seabrook Circle
- Seabrook, Texas 77586
- Owner Phone:
- (281) 474-5277
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Tim Broadhead Architects
- Design Firm Address:
- 811 Bradford Ave Ste 6A
- Kemah, Texas 77565
- Design Firm Phone:
- (281) 334-6700
