NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021003126 Registration Date: 10/23/2020
PROJECT
- Project Name:
- Addition to Double Barrel Fabrication
- Project Number:
- TABS2021003126
- Facility Name:
- Double Barrel Fabrication
- Location Address:
- 4745 S. Chadbourne
- San Angelo, TX 76903
- Location County:
- Tom Green
- Start Date:
- 11/2/2020
- Completion Date:
- 4/1/2021
- Estimated Cost:
- $140,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- 4500 square foot addition to fabrication shop.
- Square Footage:
- 4,519 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- M. cary Houston
RAS
- RAS Name:
- SHARLYNN L,KEYS
- RAS #:
- 418
- RAS Address:
- 512 KEYES RD
- SUNSET, TX 76270
- RAS Phone:
- (940) 841-2951
OWNER
- Owner Name:
- Double Barrel Fabrication LLC - Sam Janca
- Owner Address:
- 4745 S Chadbourne St
- San Angelo, Texas 76905
- Owner Phone:
- (325) 500-8970
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
Not Assigned
