NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021004994 Registration Date: 11/24/2020
PROJECT
- Project Name:
- RFAB - Facility Support Building - Parametric Test & RSF
- Project Number:
- TABS2021004994
- Facility Name:
- Texas Instruments Richardson Fab
- Location Address:
- 300 West Renner Road
- Richardson, TX 75080
- Location County:
- Collin
- Start Date:
- 2/1/2021
- Completion Date:
- 3/31/2022
- Estimated Cost:
- $10,000,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Build out of new clean room and associated support spaces. Convert admin space into new shipping and dock area.
- Square Footage:
- 42,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Michael j. Dattilo
RAS
- RAS Name:
- BONITA L,ANDERSON
- RAS #:
- 1087
- RAS Address:
- 1816 S FM 51 NO 400-178
- DECATUR, TX 76234
- RAS Phone:
- (940) 577-0832
OWNER
- Owner Name:
- Texas Instruments: Richardson Fab
- Owner Address:
- 300 West Renner Road
- Richardson, Texas 75080
- Owner Phone:
- 214-567-6428
- Contact Name:
- Bryan Booker
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- MJDII Architects, Inc.
- Design Firm Address:
- 16775 Addison Road suite 310
- Addison, Texas 75001
- Design Firm Phone:
- (972) 866-8600
