NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021010423 Registration Date: 3/4/2021
PROJECT
- Project Name:
- Alterations to Siemens Manufacturing Facility
- Project Number:
- TABS2021010423
- Facility Name:
- Siemens Manufacturing Facility
- Location Address:
- 501 Fountain Parkway
- Grand Prairie, TX 75206
- Location County:
- Tarrant
- Start Date:
- 4/30/2021
- Completion Date:
- 6/28/2021
- Estimated Cost:
- $100,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- convert office space to wiring assembly
- Square Footage:
- 1,800 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Hudson Lockett
RAS
- RAS Name:
- DAVID E,LARSEN
- RAS #:
- 79
- RAS Address:
- 620 SORITA CIR
- HEATH, TX 75032
- RAS Phone:
- (214) 939-3908
OWNER
- Owner Name:
- Siemens Real Estate USA
- Owner Address:
- 5555 New King Drive
- Troy, Michigan 47098
- Owner Phone:
- 512.354.0648
- Contact Name:
- Erroll Frick
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Hudson Lockett III, Architect
- Design Firm Address:
- 8525 Ferndale Road suite 204
- DALLAS, Texas 75238
- Design Firm Phone:
- (214) 336-3535
