NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021012440 Registration Date: 4/1/2021
PROJECT
- Project Name:
- Sam's Technology Center - 2021 Remodel
- Project Number:
- TABS2021012440
- Facility Name:
- Factory Six03
- Location Address:
- 603 Munger Avenue Floor 4
- Dallas, TX 75202
- Location County:
- Dallas
- Start Date:
- 4/1/2021
- Completion Date:
- 6/30/2021
- Estimated Cost:
- $130,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Renovation of existing office space in high-rise office building.
- Square Footage:
- 32,692 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Steve Trevino
RAS
- RAS Name:
- JEFFERY L,KELLEY
- RAS #:
- 55
- RAS Address:
- 780 N WATTERS RD STE 150
- ALLEN, TX 75013
- RAS Phone:
- (972) 346-1869
OWNER
- Owner Name:
- GRANITE
- Owner Address:
- 5601 GRANITE PARKWAY SUITE 1200
- PLANO, Texas 75024
- Owner Phone:
- 972.731.2308
- Contact Name:
- JIM BARRON
TENANT
- Tenant Name:
- SAM'S TECHNOLOGY CENTER - MICHAEL FITZGERALD
- Tenant Phone:
- 863.430.9683
DESIGN FIRM
- Design Firm Name:
- Go Studio
- Design Firm Address:
- 1201 Main St Suite 1370
- Dallas, Texas 75202
- Design Firm Phone:
- 214.420.4646
