NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021013148 Registration Date: 4/12/2021
PROJECT
- Project Name:
- UTSA SEB RENO FOR 3D METAL PRINTER
- Project Number:
- TABS2021013148
- Facility Name:
- UTSA
- Location Address:
- One UTSA Circle
- San Antonio, TX 78249
- Location County:
- Bexar
- Start Date:
- 5/15/2021
- Completion Date:
- 8/15/2021
- Estimated Cost:
- $245,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project involves public funds, public land, or is a Federally funded roadway project.
- Scope of Work:
- Renovate existing lab with new vestibule and 2 hour fire rated room assembly (new infrastructure, ceiling, doors, electrostatic dissipative flooring) to accommodate new UTSA procured lab equipment.
- Square Footage:
- 668 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Eduardo Ordaz
RAS
Not Assigned
OWNER
- Owner Name:
- UTSA
- Owner Address:
- One UTSA Circle
- San Antonio, Texas 78249
- Owner Phone:
- (210) 458-8072
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
Not Assigned
