NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021017057 Registration Date: 6/4/2021
PROJECT
- Project Name:
- Houston Pull Your Part
- Project Number:
- TABS2021017057
- Facility Name:
- Building 6
- Location Address:
- 2425 West Mount Houston
- Houston, TX 77088
- Location County:
- Harris
- Start Date:
- 6/15/2021
- Completion Date:
- 9/15/2021
- Estimated Cost:
- $112,500
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- parts storage building
- Square Footage:
- 1,500 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Joe Stewart
RAS
Not Assigned
OWNER
- Owner Name:
- HOUSTON PULL YOUR PART INC
- Owner Address:
- 2425 West Mount Houston
- HOUSTON, Texas 77038
- Owner Phone:
- (908) 705-3249
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Stewart Engineering Svcs
- Design Firm Address:
- 16531 Shady Lane
- Channelview, Texas 77530
- Design Firm Phone:
- (281) 862-9769
