NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021018461 Registration Date: 6/23/2021
PROJECT
- Project Name:
- Dyno Cell Upgrade
- Project Number:
- TABS2021018461
- Facility Name:
- Cummins Truck Facility
- Location Address:
- 4855 Mountain Creek Parkway
- Dallas, TX 75236
- Location County:
- Dallas
- Start Date:
- 8/1/2021
- Completion Date:
- 9/20/2021
- Estimated Cost:
- $397,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Commercial renovation to upgrade an existing truck engine testing / maintenance to be able to work on natural gas / CNG engines. Upgrades include roof exhaust, sidewall ventilation, methane detection system, safety flame detector, strobe, horn & li
- Square Footage:
- 1,170 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Registered
PERSON FILING FORM
- Contact Name:
- Waldemar Tirado
RAS
Not Assigned
OWNER
- Owner Name:
- Cummins Dallas
- Owner Address:
- 4856 Mountain Creek Parkway
- Dallas, Texas 75236
- Owner Phone:
- (972) 780-2005
- Contact Name:
- Ryne Woods
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- C&J Technical Solutions and Services, Inc.
- Design Firm Address:
- 4000 Valley Blvd Ste. 103
- Walnut, California 91789
- Design Firm Phone:
- (909) 598-6067
