NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021019036 Registration Date: 7/1/2021
PROJECT
- Project Name:
- Envases International Manufacturing Facility
- Project Number:
- TABS2021019036
- Facility Name:
- Envases International Manufacturing Facility
- Location Address:
- 1901 Wycon Drive
- Waco, TX 76712
- Location County:
- McLennan
- Start Date:
- 4/1/2021
- Completion Date:
- 2/15/2022
- Estimated Cost:
- $35,000,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Single story tilt concrete, manufacturing facility and warehouse, with a (2) story office administration area with elevator.
- Square Footage:
- 439,421 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Mary Davies
RAS
- RAS Name:
- MARY RAE,DAVIES
- RAS #:
- 1035
- RAS Address:
- 614 E SHADY GROVE RD
- IRVING, TX 75060
- RAS Phone:
- (972) 438-6134
OWNER
- Owner Name:
- Diego Genera
- Owner Address:
- 1901 Wycon Drive
- Waco, Texas 76712
- Owner Phone:
- (530) 304-2814
- Contact Name:
- Diego Genera
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Nichols Naylor
- Design Firm Address:
- 10459 South 1300 West
- South Jordan, Utah 84095
- Design Firm Phone:
- (801) 487-3330
