NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021020231 Registration Date: 7/20/2021
PROJECT
- Project Name:
- General Motors
- Project Number:
- TABS2021020231
- Facility Name:
- 3501 Olympus
- Location Address:
- 3501 Olympus Blvd Suite 200
- Dallas, TX 75019
- Location County:
- Dallas
- Start Date:
- 7/23/2021
- Completion Date:
- 1/21/2022
- Estimated Cost:
- $600,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- THE SCOPE OF THIS PROJECT IS A NON-STRUCTURAL INTERIOR FINISH-OUT IN AN EXISTING SINGLE FLOOR SUITE. SCOPE INCLUDES HVAC, ELECTRICAL, PLUMBING.
- Square Footage:
- 9,289 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Kimberly Goss
RAS
- RAS Name:
- KIMBERLY J,GOSS
- RAS #:
- 51
- RAS Address:
- 12720 HILLCREST RD STE 580
- DALLAS, TX 75230
- RAS Phone:
- (214) 348-7758
OWNER
- Owner Name:
- Billingsley Company
- Owner Address:
- 1722 Routh Street Suite 770
- Dallas, Texas 75201
- Owner Phone:
- (214) 270-0942
- Contact Name:
- Tony Cumminngs
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- idGROUP
- Design Firm Address:
- 2641 Irving Blvd
- Dallas, Texas 75207
- Design Firm Phone:
- (214) 638-6800
