NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021021140 Registration Date: 7/30/2021
PROJECT
- Project Name:
- PEPCO Interior Finish-Out @ 1551 Clovis Barker W.D.
- Project Number:
- TABS2021021140
- Facility Name:
- 1551 Clovis Barker Warehouse Development
- Location Address:
- Building 2 Suite 225 at 1551 Clovis Barker Rd
- San Marcos, TX 78666
- Location County:
- Hays
- Start Date:
- 9/1/2021
- Completion Date:
- 3/30/2022
- Estimated Cost:
- $410,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Built to Suit Spec Suite Interior Finish-Out located within a Existing Warehouse Shell Building
- Square Footage:
- 25,687 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Nathan Flores
RAS
- RAS Name:
- DAVID M,MCMILLAN
- RAS #:
- 78
- RAS Address:
- 1235 RIO LINDA ST
- SAN ANTONIO, TX 78245
- RAS Phone:
- (210) 710-7259
OWNER
- Owner Name:
- Bill Hall
- Owner Address:
- 223 Hull Lane
- Sugarland, Texas 77498
- Owner Phone:
- (281) 776-1945
- Contact Name:
- Bill Hall
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Beaty Palmer Architects
- Design Firm Address:
- Broadway Suite 600
- San Antonio, Texas 78205
- Design Firm Phone:
- (210) 212-8022
