NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2021023017 Registration Date: 8/26/2021
PROJECT
- Project Name:
- Valley Regional Medical Center - OR 4 Hybrid Cath Lab
- Project Number:
- TABS2021023017
- Facility Name:
- Valley Regional Medical Center
- Location Address:
- 100A Alton Gloor Blvd.
- Brownsville, TX 78526
- Location County:
- Cameron
- Start Date:
- 9/1/2021
- Completion Date:
- 11/12/2021
- Estimated Cost:
- $526,126
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Renovate existing space for additional medical equipment to include electrical, HVAC, plumbing and structural. Radiation shielding and physicist testing of space.
- Square Footage:
- 750 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Josh Seahorn
RAS
- RAS Name:
- ISAAC,OCHOA
- RAS #:
- 1234
- RAS Address:
- 344 N CLUBHOUSE RD
- BROWNSVILLE, TX 78521
- RAS Phone:
- (956) 312-4294
OWNER
- Owner Name:
- Sergio Loya
- Owner Address:
- 100A Alton Gloor Blvd.
- Brownsville, Texas 78526
- Owner Phone:
- (956) 350-7830
- Contact Name:
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- BHP Engineering
- Design Firm Address:
- 715 Oak Park Ave.
- Corpus Christi, Texas 78408
- Design Firm Phone:
- 361-693-6200
