NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2022002147 Registration Date: 9/30/2021
PROJECT
- Project Name:
- Metallurgical Engineering Services - New Building Addition
- Project Number:
- TABS2022002147
- Facility Name:
- Metallurgical Engineering Services Addition
- Location Address:
- 845 East Arapaho, Rd.
- Richardson, TX 75081
- Location County:
- Dallas
- Start Date:
- 11/1/2021
- Completion Date:
- 7/31/2023
- Estimated Cost:
- $950,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- To build a new ~4650.50 SF Pre-Engineered Metal Building that includes a ~1,521.50 SF Mezzanine with a 235 SF lean-to, Riser Room, (2) Restrooms, & work areas. The new bldg will be built 10 ft north of the exist'g 11,752 SF single story lab/offices.
- Square Footage:
- 6,407 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- William Milligan
RAS
Not Assigned
OWNER
- Owner Name:
- Dan Stolk - Metallurgical Engineering Services, Inc.
- Owner Address:
- 845 East Arapaho, Rd.
- Richardson, Texas 75081
- Owner Phone:
- (972) 480-0033
- Contact Name:
- Dan Stolk | Mitch Adams
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- the High-Line Group, llc.
- Design Firm Address:
- Box. 820582
- North Richland Hills, Texas 76182
- Design Firm Phone:
- (405) 410-1131
