NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2022006746 Registration Date: 12/7/2021
PROJECT
- Project Name:
- 2600 Graham Cracker Warehouse
- Project Number:
- TABS2022006746
- Facility Name:
- Paper Source Converting & Manufacturing
- Location Address:
- 2600 Graham Cracker Dr.
- Fort Worth, TX 76177
- Location County:
- Tarrant
- Start Date:
- 1/1/2022
- Completion Date:
- 6/30/2022
- Estimated Cost:
- $150,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Two Sets of Restrooms in existing warehouse.
- Square Footage:
- 1,400 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Review Complete
PERSON FILING FORM
- Contact Name:
- Connie Fleming
RAS
Not Assigned
OWNER
- Owner Name:
- Paper Source Manufacturing Texas
- Owner Address:
- 4800 S Santa Fe Ave
- Vernon, California 90058
- Owner Phone:
- (323) 893-0895
- Contact Name:
- Jacob Khobian
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Magee Architects
- Design Firm Address:
- 2824 W 7th St.
- Fort Worth, Texas 76107
- Design Firm Phone:
- (817) 731-9392
