NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2022007081 Registration Date: 12/10/2021
PROJECT
- Project Name:
- Eutsler Technical Products
- Project Number:
- TABS2022007081
- Facility Name:
- Eutsler Technical Products
- Location Address:
- 3718 Creekmont Drive
- Houston, TX 77091
- Location County:
- Harris
- Start Date:
- 1/17/2022
- Completion Date:
- 6/30/2023
- Estimated Cost:
- $1,000,000
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Interior buildout of a single story existing pre-engineered metal building into a manufacturing facility.
- Square Footage:
- 22,300 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Mark Verret
RAS
- RAS Name:
- TIM,MULLINS
- RAS #:
- 167
- RAS Address:
- 15650 WALDEN RD APT 4105
- MONTGOMERY, TX 77356
- RAS Phone:
- (713) 530-4768
OWNER
- Owner Name:
- Eutsler Technical Products
- Owner Address:
- 3718 Creekmont Drive
- Houston, Texas 77091
- Owner Phone:
- 713-686-8209
- Contact Name:
- Michael Borski
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Verret Group Construction
- Design Firm Address:
- 7 Switchbud Place Suite 192-314
- The Woodlands, Texas 77380
- Design Firm Phone:
- 281-630-4288
