NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2022011884 Registration Date: 2/16/2022
PROJECT
- Project Name:
- Wafer Granulator Building Addition
- Project Number:
- TABS2022011884
- Facility Name:
- Samsung Austin Semiconductor
- Location Address:
- 12100 Samsung Blvd
- Austin, TX 78754
- Location County:
- Travis
- Start Date:
- 5/1/2022
- Completion Date:
- 3/10/2023
- Estimated Cost:
- $690,000
- Type of Work:
- Additions to Existing Building
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Small building addition for the housing of additional wafer granulator equipment. This building addition and the existing building are equipment spaces not readily accessible to the public and require security clearance for access.
- Square Footage:
- 265 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Nick Angelo
RAS
- RAS Name:
- MARK S,ROBINSON
- RAS #:
- 1561
- RAS Address:
- PO BOX 9063
- AUSTIN, TX 78766
- RAS Phone:
- (512) 905-6005
OWNER
- Owner Name:
- Samsung Austin Semiconductor
- Owner Address:
- 12100 Samsung Blvd
- Austin, Texas 78754
- Owner Phone:
- (505) 980-7317
- Contact Name:
- Ryan Barrett
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Fuse Architecture Studio
- Design Firm Address:
- 1005 East St. Elmo Rd. Building 4
- Austin, Texas 78745
- Design Firm Phone:
- (512) 992-1520
