NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2022016694 Registration Date: 4/14/2022
PROJECT
- Project Name:
- S2A Modular Building C
- Project Number:
- TABS2022016694
- Facility Name:
- S2A Modular
- Location Address:
- 1619 Exchange Pkwy.
- Waco, TX 76712
- Location County:
- McLennan
- Start Date:
- 5/9/2022
- Completion Date:
- 5/9/2023
- Estimated Cost:
- $4,000,000
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- New factory for constructing modular buildings.
- Square Footage:
- 102,245 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Sterling Thompson
RAS
Not Assigned
OWNER
- Owner Name:
- S2A Investments LLC
- Owner Address:
- 287 Baldwin Rd.
- Patterson, California 95363
- Owner Phone:
- (951) 240-1433
- Contact Name:
- Bryan Stancil
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Sterling & Kap Architects
- Design Firm Address:
- 2416 Columbus Ave.
- Waco, Texas 76701
- Design Firm Phone:
- (254) 756-2311
