NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2022019725 Registration Date: 5/23/2022
PROJECT
- Project Name:
- Rhino Glove Factory Employee Offices, Locker Rooms
- Project Number:
- TABS2022019725
- Facility Name:
- Rhino Glove Factory
- Location Address:
- 273 W Everman Parkway
- Fort Worth, TX 76134
- Location County:
- Tarrant
- Start Date:
- 7/18/2022
- Completion Date:
- 7/28/2023
- Estimated Cost:
- $2,745,367
- Type of Work:
- Renovation/Alteration
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- Addition of employee offices, restrooms and locker rooms inside existing shell building for employees of the proposed glove manufacturing facility in the building. Also being added is a storage room on the outside of the existing shell building
- Square Footage:
- 29,316 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Aman Sandhu
RAS
Not Assigned
OWNER
- Owner Name:
- EVERMAN FORT WORTH BUILDING 2&3 SPE LLC
- Owner Address:
- 7501 WISCONSIN AVE STE 1300W
- BETHESDA, Maryland 20814
- Owner Phone:
- (440) 213-1009
- Contact Name:
- Mark Race
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Hodges Architecture
- Design Firm Address:
- 13642 Omega
- Dallas, Texas 75244
- Design Firm Phone:
- 1-972-387-1000
