NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2022022573 Registration Date: 6/28/2022
PROJECT
- Project Name:
- Southwest Research Institute End Item Assembly and Storage Building
- Project Number:
- TABS2022022573
- Facility Name:
- Southwest Research Institute End Item Assembly and Storage Building
- Location Address:
- 6220 Culebra Road
- San Antonio, TX 78230
- Location County:
- Bexar
- Start Date:
- 9/28/2022
- Completion Date:
- 6/28/2024
- Estimated Cost:
- $4,688,906
- Type of Work:
- New Construction
- Type of Funds:
- This project is privately funded, on private land for private use.
- Scope of Work:
- The Work consists of the construction of a new lab and storage facility for End Item Assembly. Scope of work includes site work, concrete, structural steel, pre-engineered metal building. Mechanical, electrical and plumbing are included in the Work.
- Square Footage:
- 10,547 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Project Closed
PERSON FILING FORM
- Contact Name:
- Chris Ahumada
RAS
- RAS Name:
- STEPHEN A,MEYER
- RAS #:
- 1078
- RAS Address:
- 323 W AGARITA AVE
- SAN ANTONIO, TX 78212
- RAS Phone:
- (210) 250-1651
OWNER
- Owner Name:
- Southwest Research Institute
- Owner Address:
- 6220 Culebra Road
- San Antonio, Texas 78238
- Owner Phone:
- (210) 522-6694
- Contact Name:
- Theodore Turner
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- Alamo Architects
- Design Firm Address:
- 1512 South Flores Street, San Antonio, TX, USA
- San Antonio, Texas 78204
- Design Firm Phone:
- 1-210-227-2612
