NOTICE:
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
All registered projects will now require the County Appraisal District (CAD) number and the CAD document to be uploaded to TABS. Along with the CAD number and document, the Limited Liability Ownership (LLO) form will be required to be completed in full and uploaded to TABS when the building owner is a Limited Liability Corporation (LLC), Limited Liability Partnership (LLP) or Limited Partnership (LP). With an LLC, LLP or LP, a copy of the Articles of Formation (AOF) or copy of the Texas Secretary of State (SOS) document must also be uploaded.
The above documents must be available for upload at the time of registration OR at the time of updating an existing project, please be prepared with the (correct) required documents to upload to avoid delays.
WARNING:
False or misleading information provided when submitting registration forms or project information to the Department is a violation of Texas Administrative Code 68.12(e).
Texas Department of Licensing and Regulation
Architectural Barriers Project Details Page
Project #: TABS2022023422 Registration Date: 7/11/2022
PROJECT
- Project Name:
- Advanced Manufacturing and Aerospace Center
- Project Number:
- TABS2022023422
- Facility Name:
- Aerospace Center
- Location Address:
- 1800 Hawthorne
- El Paso, TX 79902
- Location County:
- El Paso
- Start Date:
- 10/31/2022
- Completion Date:
- 12/31/2024
- Estimated Cost:
- $56,000,000
- Type of Work:
- New Construction
- Type of Funds:
- This project involves public funds, public land, or is a Federally funded roadway project.
- Scope of Work:
- Construction of 5 story building, providing administrative and research laboratory spaces for both the Keck center and CSETR
- Square Footage:
- 92,000 ft 2
- Are the private funds provided by the tenant?
- No
- Current Status:
- Inspection Complete
PERSON FILING FORM
- Contact Name:
- Marcela Rhoads
RAS
- RAS Name:
- MARCELA ABADI,RHOADS
- RAS #:
- 240
- RAS Address:
- 7516 DANFIELD CT
- DALLAS, TX 75252
- RAS Phone:
- (214) 403-8714
OWNER
- Owner Name:
- Mark McGurk
- Owner Address:
- 500 W. University Ave
- El Paso, Texas 79968
- Owner Phone:
- (915) 747-5555
- Contact Name:
- Mark McGurk
TENANT
Not Assigned
DESIGN FIRM
- Design Firm Name:
- TreanorHL
- Design Firm Address:
- 211 North Record St, Ste 450
- Dallas, Texas 75202
- Design Firm Phone:
- 877-842-4858
